A large A0 portrait LED light pocket supplied with 3m high, 6mm rods for added strength. Popular with estate agents, restaurants and retail outlets.
Inclusive of
|
Features:
|
Overall pocket size (mm) | 926 x 1274 | |
Poster size (mm) | A0 - 841 x 1189 | |
Visible poster area (mm) | 823 x 1171 | |
Portrait cable centres (mm) | 870 | |
Total display wattage | 50 watts | |
Manufacturer's guarantee | 1 year against manufacturer's defects |
Brightness & Pocket Size
A2, A1 & A0 light pockets will not be as bright as A4 & A3 pockets due to the increased surface area.
What Paper Should I Use?
For best result we recommend that posters are printed on a back lit paper. Most modern printers will be able to print on this type of material.
IMPORTANT - Caring for your Acrylic Displays
Do not under any circumstances use polish or cleaning agents on acrylic as this can cause permanent damage to the surface and polished edges of the acrylic causing crazing.
Cleaning of the product is important but please follow the guidelines in the Instructions & Care Pack provided to keep your LED pockets looking as good as new.
The 6mm rods are suitable for ceilings of 3m high or below and must be cut on-site. If this is not possible please contact us about our factory cutting service prior to delivery.
Timers for LED Displays
If you have a single or multiple drops of Led pockets in your window you may wish to use a timer on them. It is best to ask an electrician for advice regarding a suitable timer for your pockets. The reason for this is that many of the timer’s available work well with incandescent bulbs but are not suitable for led’s.
The timer used can be digital or mechanical but must be compatible otherwise permanent damage can be caused to the pocket and timer.