|Overall pocket size (mm)||382 x 505|
|Poster size (mm)||A3 - 297 x 420|
|Visible poster area (mm)||280 x 406|
|Portrait cable centres (mm)||326|
|Landscape cable centres (mm)||449|
|Total display wattage||10 watts|
|Manufacturer's guarantee||1 year against manufacturer's defects|
Brightness & Pocket Size
A2, A1 & A0 light pockets will not be as bright as A4 & A3 pockets due to the increased surface area.
What Paper Should I Use?
Backlit paper is by far the best choice to achieve excellent results.
IMPORTANT - Caring for your Acrylic Displays
If you need to remove fingerprints etc. from acrylic, please refer to Instructions & Care Pack provided with your light pockets. Instruction pack will advise you about cleaning of the display.
Do not under any circumstances use polish or cleaners on acrylic as this can cause permanent damage to the surface and polished edges of the acrylic causing crazing.
Timers for LED Displays
The LED kits are supplied with a 3 pin plug and are therefore easy to connect to the mains supply. You can also run multiple kits from fused spurs. Ask your electrician to advise you on how this might simplify your installation and fit a suitable timer so that the pockets are only illuminated when necessary.
Timers can be used for LED displays but care must be taken in identifying the correct type. The timer you choose should be Cfl/LED compatible or your display pockets may be permanently damaged.